Most edge bander machines work by feeding an edge stipping through a machine until it is tight against the processed particle board. Then a roller or hot air gun applies heat to activate the glue and hold the strip in place. A clamp then presses and holds the banding firmly against the board's edge as it moves through a roller press for several seconds to ensure that there is sufficient glue on all parts of the banding material.
A second roller or hot air gun applies more heat which melts any remaining adhesive, allowing you to cut off any excess banding material easily, and the board is ready to be used.
There are at least four other methods of applying edge banding.
Hot air/laser
Iron-on
Laser edging
Edge banding tape
